Designlight Scandinavian AB
About us
The lighting company Designlight Scandinavian AB, a wholesale and manufacturing company based in Moheda, was started in 1996 by the couple Björn & Jessica Hultqvist.
DESIGN
The company has developed into one of the leaders in LED lighting. All products are developed and designed by DESIGNLIGHT SCANDINAVIAN AB. Because we develop ourselves and manufactures the products, we have full control over the entire manufacturing process. It should be simple and above all safe to install our lighting. Innovative product series are the result of a good dialogue between electrical professionals and us as a luminaire manufacturer.
QUALITY
We are very careful with the choice of raw materials for our luminaires for longer durability, safety and highest quality. Designlight has a number of own brands where quality and smart solutions for installers and users is a success factor, which has received a great deal of attention in the industry.
ENVIRONMENT
Designlight is constantly striving to develop services and products that are customized for the environment. We do this by using renewable resources in such closed cycles as possible and by avoiding the use of pollutants and thereby prevent pollution.
Products & services
Liny I25-1200
Liny is a flexible, low-profile IP44 LED all-round luminaire. Turn on/off. Selectable effect and light flow. Choice of color temperature 3000K or 4000K. Preset at 4000K and 40W. Mounted in the ceiling or on the wall, (IP40). Thanks to easy opening of the gables, so installation time can be minimized. Prismatic cup (PMMA), patented regular hexagon microprismatic which provides even light distribution and good protection against glare. Frosted film attached. Frame in white lacquered sheet steel. Sliding end caps made of impact-resistant plastic. IK07 D-marked Interconnectable 2.5 mm² with 5-pin terminal block at each end. Cable entry via ends, as well as two holes on the back. Also available with sensor (I25-1200S) and in 600 mm and 1500 mm length.
Liny I25-1200S
Industrial luminaire 3000K/4000K 40W Sensor Liny is a flexible, low-profile IP44 LED all-round luminaire. With sensor, Microwave. Selectable effect and light flow. Choice of color temperature 3000K or 4000K. Preset at 4000K and 40W. Mounted in the ceiling or on the wall, (IP40). Thanks to easy opening of the end panels, installation time can be minimized. Prismatic cup (PMMA), patented regular hexagon microprismatic which provides even light distribution and good protection against glare. Frosted film attached. Frame in white lacquered sheet steel. Sliding end caps made of impact-resistant plastic. IK07 D-marked Switchable 2.5 mm² with 5-pin terminal at each end. Cable entry via ends, as well as two holes on the back. You can slave connect up to 7 Liny without a sensor to this fixture and thus have the sensor activate lights for a larger area. Also available without sensor (I25-1200) and in 600 mm and 1500 mm length.
Izzy TZI-18D
Slim elegant plafond. Dimmable. 18W, 1500 lumens. Adjustable light color 3000K, 4000K or 6000K. IP44. A number of mounting options: semi-recessed with spring-loaded brackets, (adjustable hole drilling 65-180 mm when recessed). Installation on a thick ceiling or directly in a ceiling box. Must not be covered with combustible material. Safety wire between frame and cup for safer mounting. The plafond can be mounted on the ceiling or on the wall. Spread angle 110 degrees. PC frame and dome in PMMA. CRI>80. IK03. L70B80: 35,000H
Izzy TZI-12/15/18W PIR
Slim elegant plafond, with PIR sensor. Adjustable power - Lumen: 12W: 1000~1200/15W: 1300~1500/18W: 1500~1800lm. Adjustable light color 3000K, 4000K or 6000K. Turn on/off. Dip-switch 4 different setting possibilities. IP20. A number of mounting options: semi-recessed with spring-loaded brackets, (adjustable hole drilling 65-180 mm when recessed). Installation on a thick ceiling or directly in a ceiling box. Must not be covered with combustible material. Safety wire between frame and cup for safer installation. The plafond can be mounted on the ceiling or on the wall. Spread angle 110 degrees. PC frame and dome in PMMA. CRI>80. IK03. L70B80: 35,000H The luminaire turns on automatically when movement comes within the detection area and turns off after a set time when movement is no longer noted. Detection surface - see product manual. Cable entry 2-pole quick connection
Roundy TLE-15, TLE-18, TLE-24 - 3000/4000/5000K
Roundy ceilings are available in 3 sizes and can be installed on the wall/ceiling and provide a wide light pattern suitable for basic lighting/general lighting. Light color can be set between 3000/4000/5000K to suit your needs. Depending on the variant 15W, 18W, 24W, the luminaire gives between 1106 lm - 2357 lumen. Roundy is an installation-friendly luminaire with inputs/outputs for cable entry from two sides or from the back of the luminaire. Distances between the fixture's screw mounts are adapted to suit installation in appliances (60 mm) and ceiling boxes (70 mm). The fixture is IK10 rated and is suitable for locations that require high impact resistance.
Plafond Roundy TLE-18S 18W
Roundy plafonds P54 can be installed on walls/ceilings and provide a wide light pattern 110° dispersion angle, CRI>80, which is suitable for basic lighting/general lighting. Color temperature can be set between 3000/4000/5000K to suit your needs. Depending on the light setting, the luminaire provides a full 1844/2102/2056 lumens. Roundy is an installation-friendly fixture with inputs/outputs for cable entry from two sides or from the back of the fixture. Distances between the fixture's screw mounts are adapted to suit installation in appliances (60 mm) and ceiling boxes (70 mm). The fixture is IK10 rated and is suitable for locations that require high impact resistance. Ø 270 mm. Settings the lamp's microwave sensor; Detection area: Here you can set the sensor's sensitivity in 4 different modes (25, 50, 75 or 100%) Hold time: How long the luminaires must be lit from the last recorded movement (5s, 90s, 3 min or 10 min) Daylight sensor: At which ambient light the sensor should be active (the lights should be lit) 5, 15, 50 Lux or inactive Slave connection of luminaires: Connect a maximum of 4 luminaires in the "Roundy" series after a TLE-18S. • Microwave sensor • Easy to install • Low energy consumption • Fits ceiling box • Slim design • Flexible cable entries
Framy
Framy is a brilliant light frame with an output of 36 watts and a frame in elegant white (RAL9003) or Black design. It offers pleasant and flicker-free light. With its prismatic surface, it provides minimal glare (UGR19). The light frame has a beam angle of 90° and provides a light flux of 3400lm. Framy is ideal for environments that require good and pleasant general lighting and fits perfectly in various places such as restaurants, shopping centers, schools, offices and shops. Framy is available in the colors black or white and as on/off or with Dali. It is only 14 mm thin and can be easily mounted in the supporting structure of the suspended ceiling. The plate in the false ceiling where Framy is installed can be easily put back and fits perfectly into the Framy frame without having to be modified. The LED luminaire is supplied with a pre-assembled cord stand with EU plug (2m). Setting options: Brightness can be preset in 4 modes (30/32/34/36W), which gives a brightness of 2800/3000/3200/3400 lumens.
Tracy
Tracy is a flexible downlight for general lighting in public buildings, offices, corridors, etc. These downlights are of the larger type, suitable for e.g. replace older luminaires with PLC compact fluorescent lamps. The luminaire's setting options mean that both light color and effect can be optimized for your particular project. Tracy is available in 2 different sizes and as On/Off or Dali. Setting options: The color temperature is adjustable (3000K or 4000K) and also the effect on On/Off can be adjusted in 2 levels. Power and light color are adjusted with a DIP switch on the luminaire's driver and back. All versions of Tracy are equipped with a junction box and quick connector to make installation easier. Color is white RAL9003. A black or chrome reflector is also available as an accessory. The change is simple and no tools are needed.
Henry Basic
With its 10360 lumens, Henry Basic provides enough light to replace most 1200/1500mm luminaires with T8 or T5 fluorescent tubes. Simple installation, tool-free connection, bracket for cable assembly in combination with adjustable brightness make Henry Basic the ultimate replacement. Mounted on the roof or on a wire with an integrated wire attachment. The luminaire can be opened and has a quick connection with a 5-pole terminal for 2.5 mm². The luminaire is connected with ease after assembly. Recommended mounting height approx. 4-8m. Light properties/materials Beam angle 90° with efficiency approx. 165lm/W. Made in white lacquered sheet steel. Henry Basic is also available in Length 1650 mm (45/56/70/80 W) and provides 7650 lm - 13600 lm.